HelaDuct Wiring Ducts

Working efficiently in the tightest of spaces and implementing powerful designs is working smart.  Working with cable management systems from HellermannTyton creates great new opportunities for your daily routine.

Our range of wiring ducts offer optimum protection for cables and installers, used in panels and switching stations.

Managing cables in the ducts is a key issue for all panel builders.  Cables must be held securely and order must be maintained.  This reduces the likelihood of any damage to cables which might lead to malfunctioning, it also reduces the effort and time for maintenance and repair. 

The HelaDuct range provides the most advanced and powerful system of wire retainers and other accessories on the market.

 

 

HelaDuct HTWD-PW for large diameter wires used in control panels and switching systems.

 

Features and Benefits

  • Wide slots suitable for large diameter wires
  • Wide fingers provide additional wire support
  • Smooth, burr-free edges protect installers from injury and wires from damage
  • Fingers can be removed with no sharp edges at pre-notched snap-off points
  • Further pre-notched snap-off point in base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
  • Raised mounting points for easily, quickly and securely fastening wire retainers and other accessories prior to cabling
  • Wire retainers and accessories leave no protruding parts below surface of duct
  • Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
  • Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
  • Additional retainer nub on fingers on ducts height 80 and above to prevent cables from slipping
  • Base perforation according to DIN EN-50085
  • Colour Grey
  • 2m lengths

 

HelaDuct HTWD-PN for small diameter wires used in control panels, switching systems and especially electronic control systems.

 

Features and Benefits

  • Narrow slots suitable for small diameter wires
  • Smooth burr-free edges, protect installers from injury and wires from damage
  • Fingers can be removed with no sharp edges at pre-notched snap-off points
  • Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
  • Raised mounting points for easily and securely fastening wire retainers and other accessories prior to cabling
  • Wire retainers and accessories leave no protruding parts below surface of duct
  • Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
  • Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
  • Additional retainer nub on fingers on ducts height 80 and above to prevent cables from slipping
  • Base perforation according to DIN EN 50085
  • Colour grey
  • 2 m lengths

 

HelaDuct HTWD-PD Din-series rigid PVC wiring ducts used to route and protect wires in control panels and switching sytems.

 

Features and Benefits

  • Narrow slots suitable for small-diameter wires
  • Smooth burr-free edges protect installers from injury and wires from damage
  • Fingers can be removed with no sharp edges at pre-notched snap-off points
  • Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
  • Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
  • Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
  • Base perforation according to DIN EN 50085
  • Colour grey
  • 2m lengths

HelaDuct HTWD-HF wiring ducts are used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of fire, such as in public transport, tunnels, data-processing centers or public buildings.

 

 

Features and Benefits

  • Excellent fire-safety characteristics
  • Narrow slots suitable for small diameter wires
  • Smooth, burr-free edges protect installers from injury and wires from damage
  • Fingers can be removed with no sharp edges are pre-notched snap-off points
  • Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
  • Duct covers hold securely even in a vertical position and under vibration
  • Cover is flush with side of duct, allowing for tight, contiguous placement of duct
  • Base perforation according to DIN EN 50085
  • Grey colour
  • 2m lengths

HelaDuct HTWD-PWB Wiring Duct used for intrinsically safe wiring, for instance in chemical plants or anywhere where explosive gases may be present.

 

 

Features and Benefits

  • Blue colour to identify intrinsically safe wiring
  • Wide slots suitable for large diameter wires
  • Wide fingers provide additional wire support
  • Smooth burr-free edges protect installers from injury and wires from damage
  • Fingers can be removed with no sharp edges at pre-notched snap-off points
  • Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
  • Raised mounting points for easily, quickly and securely fastening wire retainers and other accessories prior to cabling
  • Wire retainers and accessories leave no protruding parts below surface of duct
  • Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
  • Cover is flush with side of duct, allowing for tight, contiguous placement of duct
  • Additional retainer nub on fingers to prevent cables from slipping
  • Base perforation according to DIN EN 50085
  • Colour Blue
  • 2m lengths

A vast range of accessories are also available:

 

Stay in touch with us!


Update: 16/10/2017 © HellermannTyton 2017
Contact