Rigid PVC wiring ducts HTWD-PN-80X40

HelaDuct HTWD-PN for small-diameter wires, Article number: 184-10098

Narrow slots suitable for small-diameter wires
Smooth, burr-free edges protect installers from injury and wires from damage
Fingers can be removed with no sharp edges at pre-notched snap-off points
Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
Raised mounting points for easily and securely fastening wire retainers and other accessores prior to cabling
Wire retainers and accessories leave no protruding parts below surface of duct
Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
Additional retainer nub on fingers on ducts height 80 and above to prevent cables from slipping
Base perforation according to DIN EN 50085

T1E wiring ducts are used in control panels, switching systems, and especially electronic control systems.

Application Tool	4FTOOL
Colour	Grey (GY)
Current leak stable Yes/No	Yes
Description Short (BMEcat) (max. 150 characters)	Wiring duct 80x40 mm, 2000 mm, PVC, grey
Fixation Method	Screw Mounting
GLOBAL PART DESCRIPTION	HTWD-PN-80X40-PVC-GY
Pack Cont.	24m
Package Quantity per	metre
Product Family	HelaDuct HTWD-PN for small-diameter wires
Product Group	Rigid PVC wiring ducts
Type of side wall	Slotted

ELV compliant Dir. Art. 4 (2)	YES
Flammability	UL 94 V0
Hazardous good	No
Material	Polyvinylchloride (PVC)
Operating Temperature - °C	-5 °C to +65 °C
Self extinguishing (Yes/No) ETIM	Yes
Specifications
Specifications	ANSI/UL 1565, ANSI/UL 62275, ANSI/UL 746B
UL-File Number	E357929