Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
06/11/2025

Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

1,130 products
Reset all
Blind plug, ⌀M6, black, 3000pcs.
Disc covers the hole and minimizes ingress of dust, dirt and water.
Compare
Blind plug, ⌀M6, black, 3000pcs.
M6PUSHPIN-PA46-BK 151-01071
Compare
Distributors
Add to watchlist
3000 pcs.
Black (BK) M6PUSHPIN-PA46-BK 151-01071
Bundling clip for stud, L=60.0mm, SO=20.0mm, black, 1000pcs.
Bundling clip, for stud 5 mm. The article is designed for our ATS flex but it could be use also with cable ties or tapes.
Compare
Bundling clip for stud, L=60.0mm, SO=20.0mm, black, 1000pcs.
ATSBC60SOC20SBS5-PA66HIRHS-BK 102-68368
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) ATSBC60SOC20SBS5-PA66HIRHS-BK 102-68368
Bundling clip for hole (round)/with pipe/tube holder, L=60.0mm, SO=16.0mm, black, 2900pcs.
Tape clip with an additional omega clip for bundles 13.0 mm, for round holes.
Compare
Bundling clip for hole (round)/with pipe/tube holder, L=60.0mm, SO=16.0mm, black, 2900pcs.
TC60OC13FT6.7-PA66HIRHS-BK 151-03457
Compare
Distributors
Add to watchlist
2900 pcs.
Black (BK) TC60OC13FT6.7-PA66HIRHS-BK 151-03457
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
Self adhesive one piece fixing mounts RA6 (l) and RB5 (r).
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6APT-A-PA66-NA 151-13405
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) RA6APT-A-PA66-NA 151-13405
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18APT-A-PA66-BK 151-03607
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) RA18APT-A-PA66-BK 151-03607
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13APT-A-PA66-NA 151-13201
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) RA13APT-A-PA66-NA 151-13201
Protection cap for connectors, black, 1100pcs.
ConnectorClips are available for many different connector types and fixing varieties.
Compare
Protection cap for connectors, black, 1100pcs.
CP31DOP-PA66HIRHS-BK 151-00214
Compare
Distributors
Add to watchlist
1100 pcs.
Black (BK) CP31DOP-PA66HIRHS-BK 151-00214
Protection cap for connectors, black, 600pcs.
ConnectorClips are available for many different connector types and fixing varieties.
Compare
Protection cap for connectors, black, 600pcs.
CP21DOP-PA66HIRHS-BK 151-00465
Compare
Distributors
Add to watchlist
600 pcs.
Black (BK) CP21DOP-PA66HIRHS-BK 151-00465
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, brown, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, brown, 5000pcs.
FT6.5 PLUG-PA46-BN 151-01363
Compare
Distributors
Add to watchlist
5000 pcs.
Brown (BN) FT6.5 PLUG-PA46-BN 151-01363
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
FT6.5Plug-PA66HIRHSUV-BK 151-01317
Compare
Distributors
Add to watchlist
5000 pcs.
Black (BK) FT6.5Plug-PA66HIRHSUV-BK 151-01317
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Compare
Cable clip with pipe/tube holder
DTC18x5-S-PA66HIRHS-BK 156-01311
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) DTC18x5-S-PA66HIRHS-BK 156-01311
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Compare
Cable clip with pipe/tube holder
DTC18x6.5-S-PA66HIRHS-BK 156-01312
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) DTC18x6.5-S-PA66HIRHS-BK 156-01312
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Compare
Cable clip with pipe/tube holder
DTC18x18-20-S-PA66HIRHS-BK 156-01314
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) DTC18x18-20-S-PA66HIRHS-BK 156-01314
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Compare
Cable clip with pipe/tube holder
DTC18x28-S-PA66HIRHS-BK 156-01315
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) DTC18x28-S-PA66HIRHS-BK 156-01315
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
Disc protects against vibration as well as leakage of debris into the hole.
Compare
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
BC90AH-PA66HIRHSUV-BK 151-00994
Compare
Distributors
Add to watchlist
4000 pcs.
Black (BK) BC90AH-PA66HIRHSUV-BK 151-00994
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCSFT6.5-MD-PA66HIRHS-BK 102-69065
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) ATSBCSFT6.5-MD-PA66HIRHS-BK 102-69065
Connector clip for hole (oval), black, 1000pcs.
Compare
Connector clip for hole (oval), black, 1000pcs.
CCAMPSFT7.0x12.0-PA66HIRHS-BK 155-43802
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) CCAMPSFT7.0x12.0-PA66HIRHS-BK 155-43802
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-BK 151-03201
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) RA13-PA66-BK 151-03201
Cable clip for adhesive use/with pipe/tube holder, Dmax=6mm
Self adhesive one piece fixing mounts RA6 (l) and RB5 (r).
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=6mm
RA6APT-A-PA66-BK 151-03393
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) RA6APT-A-PA66-BK 151-03393
Cable clip for adhesive use/with pipe/tube holder, Dmax=9mm
Self adhesive one piece fixing mounts RA6 (l) and RB5 (r).
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=9mm
RA9APT-A-PA66-BK 151-03396
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) RA9APT-A-PA66-BK 151-03396
Cable clip, Dmin=11mm, Dmax=20mm
IAHC( )AH in combination with an IAHC( )T.
Compare
Cable clip, Dmin=11mm, Dmax=20mm
IAHC2TIAHC3T-HIRHS-BK-PA66HIRHS-BK 156-04216
Compare
Distributors
Add to watchlist
400 pcs.
Black (BK) IAHC2TIAHC3T-HIRHS-BK-PA66HIRHS-BK 156-04216
Cable clip, T=1-3mm, Dmin=3mm, Dmax=13mm
Compare
Cable clip, T=1-3mm, Dmin=3mm, Dmax=13mm
IAHC1TCBTOSTUD5-PA66HIRHS-BK 156-03376
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) IAHC1TCBTOSTUD5-PA66HIRHS-BK 156-03376
Cable clip for stud, Dmin=5.0mm, Dmax=6.0mm
IPC-P
Compare
Cable clip for stud, Dmin=5.0mm, Dmax=6.0mm
IPC5P-PA66-BK 151-00870
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) IPC5P-PA66-BK 151-00870
Connector clip for connector, EWCAP-005-11, black, 1000pcs.
Connector adapter with strain relief. The integrated winding bar protects the connection and increases its service life.
Compare
Connector clip for connector, EWCAP-005-11, black, 1000pcs.
CC11SLCC11BC22-PA66HIRHS-BK 151-03895
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) CC11SLCC11BC22-PA66HIRHS-BK 151-03895
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
AHC3CH2-PA66HIRHS-BK 151-00937
Compare
Distributors
Add to watchlist
450 pcs.
Black (BK) AHC3CH2-PA66HIRHS-BK 151-00937
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
AHC45BHG2-PA46-GY 151-01377
Compare
Distributors
Add to watchlist
700 pcs.
Grey (GY) AHC45BHG2-PA46-GY 151-01377
Backshell, nom⌀4.5mm, black, 1500pcs.
Connector backshell for convoluted tube.
Compare
Backshell, nom⌀4.5mm, black, 1500pcs.
BSRB4KPT90NW4.5-PA66HIRHS-BK 151-03388
Compare
Distributors
Add to watchlist
1500 pcs.
Black (BK) BSRB4KPT90NW4.5-PA66HIRHS-BK 151-03388
Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.
Compare
Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.
SPSWC8-SpS-ML 151-03052
Compare
Distributors
Add to watchlist
100 pcs.
Metal (ML) SPSWC8-SpS-ML 151-03052
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, Dmin=11.0mm, Dmax=20.0mm
Compare
Cable clip, Dmin=11.0mm, Dmax=20.0mm
IAHC2TCR-PA66HIRHS-BK 156-03236
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) IAHC2TCR-PA66HIRHS-BK 156-03236
Bundling clip, L=39.0mm, black, 500pcs.
Bundling Clip 39x2.5 mm black PA66HIRHS
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCSFT6.5-PA66HIRHS-BK 102-69066
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) ATSBCSFT6.5-PA66HIRHS-BK 102-69066
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3EH2-PA66HIRHS-BK 151-00928
Compare
Distributors
Add to watchlist
800 pcs.
Black (BK) AHC3EH2-PA66HIRHS-BK 151-00928
Blind plug, ⌀M6, T=M6mm, black, 5000pcs.
Disc covers the hole and minimizes ingress of dust, dirt and water.
Compare
Blind plug, ⌀M6, T=M6mm, black, 5000pcs.
M6PUSHPIN-PA66HIRHSUV-BK 151-01304
Compare
Distributors
Add to watchlist
5000 pcs.
Black (BK) M6PUSHPIN-PA66HIRHSUV-BK 151-01304
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
Disc protects against vibration as well as leakage of debris into the hole.
Compare
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
BC90AH2-PA66HIRHSUV-BK 151-01109
Compare
Distributors
Add to watchlist
4000 pcs.
Black (BK) BC90AH2-PA66HIRHSUV-BK 151-01109
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Compare
Cable clip with pipe/tube holder
DTC18x9-11-S-PA66HIRHS-BK 156-01313
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) DTC18x9-11-S-PA66HIRHS-BK 156-01313
Connector clip, EWCAP-005-7, black, 5000pcs.
Compare
Connector clip, EWCAP-005-7, black, 5000pcs.
EC54-PA66HIRHSUV-BK 151-01042
Compare
Distributors
Add to watchlist
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Cable clip for adhesive use, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Compare
Cable clip for adhesive use, Dmax=6.0mm
RA6APT-I-PA66-NA 151-01635
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) RA6APT-I-PA66-NA 151-01635
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
Harness clip OHC8 for pre assembling on harnesses.
Compare
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
OHC16-PA66HIRHS-BK 151-00335
Compare
Distributors
Add to watchlist
2000 pcs.
Black (BK) OHC16-PA66HIRHS-BK 151-00335
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
Harness clip HC90SFT for oval holes and varying bundle diameter.
Compare
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), T=1.0 - 3.0mm, ⌀6.1 - 6.6 mm, Dmax=12.0mm
Harness clip made of polypropylyne with arrow head for round holes 6.3 mm.
Compare
Cable clip for hole (round), T=1.0 - 3.0mm, ⌀6.1 - 6.6 mm, Dmax=12.0mm
HC10.5WPM6.3-PP-BK 151-03957
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) HC10.5WPM6.3-PP-BK 151-03957
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
AHC3DH-PA66HIRHS-BK 151-00181
Compare
Distributors
Add to watchlist
300 pcs.
Black (BK) AHC3DH-PA66HIRHS-BK 151-00181
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
Compare
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
HC140SFT62x122-PA6HIR-BK 151-00423
Compare
Distributors
Add to watchlist
1200 pcs.
Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Compare
Cable clip for screw fixation, ⌀3.1 mm
FKH80-PA66HIR-BK 151-16800
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC( )AH in combination with an IAHC( )T.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC5FH-PA66HIRHS-BK 151-00787
Compare
Distributors
Add to watchlist
350 pcs.
Black (BK) IAHC5FH-PA66HIRHS-BK 151-00787
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for hole (round), L=50.0mm, black, 4000
The 90-degree configuration of this mini channel provides routing for a wire harness around a corner.
Compare
Bundling clip for hole (round), L=50.0mm, black, 4000
BC90FT6-PA66HIRHSUV-BK 151-00993
Compare
Distributors
Add to watchlist
4000
Black (BK) BC90FT6-PA66HIRHSUV-BK 151-00993
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
Compare
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
BC90FT6B-PA66HIRHSUV-BK 151-01051
Compare
Distributors
Add to watchlist
4000 pcs.
Black (BK) BC90FT6B-PA66HIRHSUV-BK 151-01051
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Compare
Cable clip for screw fixation, ⌀3.1 mm
FKH50-PA66HIR-BK 151-16500
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Compare
Cable clip for screw fixation, ⌀3.1 mm
FKH25-PA66HIR-BK 151-16250
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Compare
Cable clip for screw fixation, ⌀3.1 mm
FKH30-PA66HIR-BK 151-16300
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for stud, ⌀6.35 mm, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, ⌀6.35 mm, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
IPC10P-PA66HIR-BK 151-14400
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) IPC10P-PA66HIR-BK 151-14400
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-14132
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) IPC13P-PA66-BK 151-14132
Cable clip for stud, ⌀6.35 mm, Dmin=13.7mm, Dmax=14.7mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, ⌀6.35 mm, Dmin=13.7mm, Dmax=14.7mm, ⌀5.0 mm
IPC15P-PA66HIR-BK 151-14502
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) IPC15P-PA66HIR-BK 151-14502
Cable clip for stud, ⌀6.35 mm, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
Interlockable for more installation options.
Compare
Cable clip for stud, ⌀6.35 mm, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
IPC23P-PA66-BK 151-14603
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) IPC23P-PA66-BK 151-14603
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
Arrowhead clip with TwistLock.
Compare
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
HTS9-PA66-BK 151-00725
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) HTS9-PA66-BK 151-00725
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
Backshell (V0)
Compare
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
BSE90NW17-PA66/PA6FR-BK 151-02772
Compare
Distributors
Add to watchlist
800 pcs.
Black (BK) BSE90NW17-PA66/PA6FR-BK 151-02772
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Compare
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M-PA66HIRHS-NA 151-02227
Compare
Distributors
Add to watchlist
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
Couple Connector for hole 4.9 - 5.1 mm and for hole 6.4- 7.0 mm.
Compare
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
AH5.0FT6.7-PA66HIRHS-BK 151-03386
Compare
Distributors
Add to watchlist
2500 pcs.
Black (BK) AH5.0FT6.7-PA66HIRHS-BK 151-03386
Metal cable clip, ⌀6.0 mm, ⌀32mm, metal, 50pcs.
Compare
Metal cable clip, ⌀6.0 mm, ⌀32mm, metal, 50pcs.
FP40-ST-ML 151-03051
Compare
Distributors
Add to watchlist
50 pcs.
Metal (ML) FP40-ST-ML 151-03051
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02882
Compare
Distributors
Add to watchlist
900 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02882
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC22-PA66HS/PA66HIRHS-BK 156-00011
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) T50ROSEC22-PA66HS/PA66HIRHS-BK 156-00011
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Compare
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
CCOVAL6-PA66HIRHSUV-BK 151-01033
Compare
Distributors
Add to watchlist
1000 pcs.
Black (BK) CCOVAL6-PA66HIRHSUV-BK 151-01033
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Compare
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-BK 151-00121
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) RA13-PA66-BK 151-00121
Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.
Compare
Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.
FP20-ST-ML 151-03049
Compare
Distributors
Add to watchlist
100 pcs.
Metal (ML) FP20-ST-ML 151-03049
Metal cable clip, ⌀6.0 mm, ⌀20mm, metal, 100pcs.
Compare
Metal cable clip, ⌀6.0 mm, ⌀20mm, metal, 100pcs.
FP30-ST-ML 151-03050
Compare
Distributors
Add to watchlist
100 pcs.
Metal (ML) FP30-ST-ML 151-03050
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Compare
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀6.5 mm, Dmin=2mm, Dmax=8mm
Harness clip OHC8 for pre assembling on harnesses.
Compare
Cable clip for hole (round), ⌀6.5 mm, Dmin=2mm, Dmax=8mm
OHC8-PA66HIRHS-BK 151-00336
Compare
Distributors
Add to watchlist
2000 pcs.
Black (BK) OHC8-PA66HIRHS-BK 151-00336
Cable clip, T=1.8 - 2.25mm, ⌀13.0 - 15.0 mm, Dmin=4.9mm, Dmax=7.3mm
Deploying the mounting rail C-channel for fixing elements.
Compare
Cable clip, T=1.8 - 2.25mm, ⌀13.0 - 15.0 mm, Dmin=4.9mm, Dmax=7.3mm
HC2x7.3AH13-PV-PA66W-BK 151-00899
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) HC2x7.3AH13-PV-PA66W-BK 151-00899
Cable clip for hole (round), ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm
Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.
Compare
Cable clip for hole (round), ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm
AHC2AH-PA66HIRHS-BK 151-02881
Compare
Distributors
Add to watchlist
900 pcs.
Black (BK) AHC2AH-PA66HIRHS-BK 151-02881
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Automatic Harness Clip Family for oval holes.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3BHR-PA66HIRHS-BK 151-00370
Compare
Distributors
Add to watchlist
400 pcs.
Black (BK) AHC3BHR-PA66HIRHS-BK 151-00370
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3CHR-PA6HIR-BK 151-00371
Compare
Distributors
Add to watchlist
400 pcs.
Black (BK) AHC3CHR-PA6HIR-BK 151-00371
Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm
Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.
Compare
Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4AH-PA66HIRHS-BK 151-00382
Compare
Distributors
Add to watchlist
450 pcs.
Black (BK) IAHC4AH-PA66HIRHS-BK 151-00382
Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
Compare
Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC5BH-PA66HIRHS-BK 151-00384
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) IAHC5BH-PA66HIRHS-BK 151-00384
Fixing elements for edges
Compare
Fixing elements for edges
FrameClampBS-SET-PA6GF15-BK 151-04249
Compare
Distributors
Add to watchlist
280 pcs.
Black (BK) FrameClampBS-SET-PA6GF15-BK 151-04249
Frame Clamp B (Base)-PA6GF15-BK
Compare
Frame Clamp B (Base)-PA6GF15-BK
Frame Clamp B (Base)-PA6GF15-BK 133-07029
Compare
Distributors
Add to watchlist
80 pcs.
Black (BK) Frame Clamp B (Base)-PA6GF15-BK 133-07029
Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 6.0mm, black, 7000pcs.
Disc surrounding push pin minimizes the ingress of dust, dirt and water.
Compare
Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 6.0mm, black, 7000pcs.
PLUGFTOVAL-PA66HIRHSUV-BK 151-01245
Compare
Distributors
Add to watchlist
7000 pcs.
Black (BK) PLUGFTOVAL-PA66HIRHSUV-BK 151-01245
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Compare
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
The holding tab increasese the tensile strength additionaly.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Cable clip for stud, Dmax=13.5mm, ⌀5.0 mm
SBF2 for fixing on weld studs and cables need to be routed close to stud.
Compare
Cable clip for stud, Dmax=13.5mm, ⌀5.0 mm
SBF2-PA66-BK 150-47700
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) SBF2-PA66-BK 150-47700
Cable clip for edge
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Compare
Cable clip for edge
EC41-PA6HIR-BK 151-00234
Compare
Distributors
Add to watchlist
750 pcs.
Black (BK) EC41-PA6HIR-BK 151-00234
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3CH-PA66HIRHS-BK 151-00381
Compare
Distributors
Add to watchlist
450 pcs.
Black (BK) IAHC3CH-PA66HIRHS-BK 151-00381
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4CH-PA6HIRHS-BK 151-00383
Compare
Distributors
Add to watchlist
450 pcs.
Black (BK) IAHC4CH-PA6HIRHS-BK 151-00383
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Compare
Distributors
Add to watchlist
500 pcs.
Black (BK) ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Distributors
Add to watchlist
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  X  YouTube  LinkedIn  URL Corporate Blog 
Contact Us Terms and Conditions Imprint Ethics Guidelines and commitments Privacy statement Sitemap Newsletter
Update: 01/11/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.290.3) | Update: 01/11/2025 | Privacy Settings
Distributors Contact