Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Compare

RB8-PA66-NA 151-13606

Compare

Add to watchlist

Two RB8 adhesive cable clamps shown.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB8-PA66-NA 151-13606

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Compare

RB5-PA66-NA 151-14059

Compare

Add to watchlist

RB5 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB5-PA66-NA 151-14059

Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm

Compare

WPC20-PA66-NA 151-75209

Compare

Add to watchlist

Compare

Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm

Compare

Add to watchlist

500 pcs.

Natural (NA) WPC20-PA66-NA 151-75209

Compare

IAHC1TFT6LGSTUD5-PA66HIRHS-BK 156-03378

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

400 pcs.

Black (BK) IAHC1TFT6LGSTUD5-PA66HIRHS-BK 156-03378

Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CCOVAL-PA66HIRHSUV-BK 151-00925

Compare

Add to watchlist

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925

Cable clip for hole (round), T=0.8 - 4.0mm, ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm

Compare

WPC15-PA66-NA 151-75159

Compare

Add to watchlist

Compare

Cable clip for hole (round), T=0.8 - 4.0mm, ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm

Compare

Add to watchlist

500 pcs.

Natural (NA) WPC15-PA66-NA 151-75159

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H8P-PA66-NA 211-60089

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H8P-PA66-NA 211-60089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H9P-PA66-NA 211-60099

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H9P-PA66-NA 211-60099

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀3.2 mm, Dmax=3.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing clip TY8H1(S) - screw fix or self adhesive.

Compare

TY8H1-PA66-NA 151-22819

Compare

Add to watchlist

Fixing clip TY8H1(S) - screw fix or self adhesive.

Compare

Cable clip, ⌀3.2 mm, Dmax=3.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) TY8H1-PA66-NA 151-22819

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for hole (round), EWCAP-005-11, black, 500pcs.

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

FT6LG.M.St.Aufn.II-PA66HIRHS-BK 155-32602

Compare

Add to watchlist

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Connector clip for hole (round), EWCAP-005-11, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) FT6LG.M.St.Aufn.II-PA66HIRHS-BK 155-32602

Connector clip for hole (oval), black, 500pcs.

Compare

CCSFT7x12-PA66HIRHS-BK 151-00194

Compare

Add to watchlist

Compare

Connector clip for hole (oval), black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) CCSFT7x12-PA66HIRHS-BK 151-00194

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H6P-PA66-NA 211-60069

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H6P-PA66-NA 211-60069

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for hole (round), black, 500pcs.

Connector Clip for Connectors with AMP connection, with fir tree for round holes.

Compare

FT6LG-AMP-PA66HIRHS-BK 155-03800

Compare

Add to watchlist

Connector Clip for Connectors with AMP connection, with fir tree for round holes.

Compare

Connector clip for hole (round), black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800

Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm

Compare

KB2-PA66-BK 231-10200

Compare

Add to watchlist

Compare

Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm

Compare

Add to watchlist

100 pcs.

Black (BK) KB2-PA66-BK 231-10200

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66-NA 211-60059

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.

4-way cable tie entry for more installation options.

Compare

MB3A-PA66-WH 151-28349

Compare

Add to watchlist

4-way cable tie entry for more installation options.

Compare

Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) MB3A-PA66-WH 151-28349

Cable clip for hole (round), T=0,7-2,2mm, ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

AHC2AH-PA66HIRHS-BK 151-02881

Compare

Add to watchlist

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

Cable clip for hole (round), T=0,7-2,2mm, ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm

Compare

Add to watchlist

900 pcs.

Black (BK) AHC2AH-PA66HIRHS-BK 151-02881

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.

2-piece fixing tie with EdgeClip for side cable routing.

Compare

T50ROSEC5B-PA66W-BK 156-03064

Compare

Add to watchlist

2-piece fixing tie with EdgeClip for side cable routing.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50ROSEC5B-PA66W-BK 156-03064

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm

Compare

IAHC4CH-PA6HIRHS-BK 151-00383

Compare

Add to watchlist

Compare

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm

Compare

Add to watchlist

450 pcs.

Black (BK) IAHC4CH-PA6HIRHS-BK 151-00383

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU13C-AL/CR-BK 211-15130

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU4-AL-NA 211-10040

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU10-AL-NA 211-10100

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU14C-AL/CR-BK 211-15140

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU17C-AL/CR-BK 211-15170

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU4C-AL/CR-BK 211-15040

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU7-AL-NA 211-10070

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H4P-PA66-NA 211-60049

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H4P-PA66-NA 211-60049

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm

Automatic Harness Clip closed.

Compare

AHC1AH-PA66HIRHS-BK 151-02874

Compare

Add to watchlist

Automatic Harness Clip closed.

Compare

Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm

Compare

Add to watchlist

1500 pcs.

Black (BK) AHC1AH-PA66HIRHS-BK 151-02874

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

T50ROSEC5A-PA66W-BK 156-00661

Compare

Add to watchlist

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC5A-PA66W-BK 156-00661

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU12C-AL/CR-BK 211-15120

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU5-AL-NA 211-10050

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU5C-AL/CR-BK 211-15050

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU7C-AL/CR-BK 211-15070

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.

Cable Tie Mounts MB and TY.

Compare

MB4A-PA66-WH 151-28469

Compare

Add to watchlist

Cable Tie Mounts MB and TY.

Compare

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) MB4A-PA66-WH 151-28469

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU11C-AL/CR-BK 211-15110

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU9C-AL/CR-BK 211-15090

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU10C-CR/AL-BK 211-15100

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU8C-AL/CR-BK 211-15080

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

T50ROSEC23-PA66W-BK 156-00843

Compare

Add to watchlist

Compare

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC23-PA66W-BK 156-00843

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Compare

AHC25FT6LG-PA66HIRHS-BK 151-01198

Compare

Add to watchlist

Compare

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Compare

Add to watchlist

1300 pcs.

Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCA180SM10.

Compare

RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390

Compare

Add to watchlist

RCA180SM10.

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCA180SM10.

Compare

RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475

Compare

Add to watchlist

RCA180SM10.

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Compare

RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCD180SM10.

Compare

RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501

Compare

Add to watchlist

RCD180SM10.

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for adhesive use, Wmax=8.9mm, ⌀4.8 mm, #8 Screw, white, 100pcs.

4-way cable tie entry for more bundling options.

Compare

MB5A-PA66-WH 151-28529

Compare

Add to watchlist

4-way cable tie entry for more bundling options.

Compare

Cable tie mount for adhesive use, Wmax=8.9mm, ⌀4.8 mm, #8 Screw, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) MB5A-PA66-WH 151-28529

Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm

Compare

RA9-PA66-NA 151-13502

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm

Compare

Add to watchlist

500 pcs.

Natural (NA) RA9-PA66-NA 151-13502

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.

Compare

CTC10FT6LG-PA66HIRHS-BK 151-00018

Compare

Add to watchlist

Compare

Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) CTC10FT6LG-PA66HIRHS-BK 151-00018

Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.

2-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.

Compare

T30REC4B-PA66HS/PA66HIRHS-BK 150-76080

Compare

Add to watchlist

2-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.

Compare

Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T30REC4B-PA66HS/PA66HIRHS-BK 150-76080

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Compare

RB14-PA66-NA 151-00505

Compare

Add to watchlist

RB14 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB14-PA66-NA 151-00505

Metal cable clip for edge, ⌀5.0-7.59mm, T=1.0 - 3.0mm, metal, 100pcs.

Double-compression design can accommodate up to 2 wires or cables of varying sizes.

Compare

MSC2-SS304-ML 151-00982

Compare

Add to watchlist

Double-compression design can accommodate up to 2 wires or cables of varying sizes.

Compare

Metal cable clip for edge, ⌀5.0-7.59mm, T=1.0 - 3.0mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MSC2-SS304-ML 151-00982

Bundling clip for hole (round), L=55.0mm, SO=13.0mm, black, 500pcs.

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

SOC5FT6LG-PA66HIRHS-BK 151-00074

Compare

Add to watchlist

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

Bundling clip for hole (round), L=55.0mm, SO=13.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) SOC5FT6LG-PA66HIRHS-BK 151-00074

Connector clip for edge, black, 1000pcs.

Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.

Compare

EC28-PA66HIRHS-BK 151-00151

Compare

Add to watchlist

Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.

Compare

Connector clip for edge, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) EC28-PA66HIRHS-BK 151-00151

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Compare

IRCCMB5A-PA66HIRHSUV-BK 156-02724

Compare

Add to watchlist

Compare

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

25

Black (BK) IRCCMB5A-PA66HIRHSUV-BK 156-02724

Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, black, 100pcs.

TY3 G1 TY3G1S Black Fixing Cable Tie Screw Mount

Compare

TY3G1S-PA66W-BK 151-11310

Compare

Add to watchlist

TY3 G1 TY3G1S Black Fixing Cable Tie Screw Mount

Compare

Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) TY3G1S-PA66W-BK 151-11310

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.2 mm, natural, 100pcs.

MB4CA Natural Self Adhesive, Srew Fixing Cable Tie Mount

Compare

MB4CAS-PA66-NA 151-28449

Compare

Add to watchlist

MB4CA Natural Self Adhesive, Srew Fixing Cable Tie Mount

Compare

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MB4CAS-PA66-NA 151-28449

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Compare

SRC150M8-PA6GF30-BK 156-02742

Compare

Add to watchlist

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Compare

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Compare

Add to watchlist

150

Black (BK) SRC150M8-PA6GF30-BK 156-02742

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for hole (round), black, 500pcs.

ConnectorClips are available for many different connector types and fixing varieties.

Compare

FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702

Compare

Add to watchlist

ConnectorClips are available for many different connector types and fixing varieties.

Compare

Connector clip for hole (round), black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702

Fixing slider for connectors, T=2.5mm, red, 1500pcs.

Fixing Slider

Compare

FSD2.5-PBTGF30-RD 151-02390

Compare

Add to watchlist

Fixing Slider

Compare

Fixing slider for connectors, T=2.5mm, red, 1500pcs.

Compare

Add to watchlist

1500 pcs.

Red (RD) FSD2.5-PBTGF30-RD 151-02390

Cable clip for hole (round), ⌀4.8 mm

C3-N66-BK.

Compare

C2-PA6HIR-BK 201-10020

Compare

Add to watchlist

C3-N66-BK.

Compare

Cable clip for hole (round), ⌀4.8 mm

Compare

Add to watchlist

100 pcs.

Black (BK) C2-PA6HIR-BK 201-10020

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.2 mm, natural, 100pcs.

MB4CA Natural Self Adhesive, Srew Fixing Cable Tie Mount

Compare

MB4CA-PA66-NA 151-28459

Compare

Add to watchlist

MB4CA Natural Self Adhesive, Srew Fixing Cable Tie Mount

Compare

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MB4CA-PA66-NA 151-28459

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for direct fixation up to two solar cables vertical to an Edge.

Compare

EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04455

Compare

Add to watchlist

EdgeClip for direct fixation up to two solar cables vertical to an Edge.

Compare

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Compare

Add to watchlist

100 pcs.

Black (BK) EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04455

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.

TY8G1 TY8G1S Black Screw Fixing Cable Tie Mount

Compare

TY8G1S-PA66W-BK 151-11810

Compare

Add to watchlist

TY8G1 TY8G1S Black Screw Fixing Cable Tie Mount

Compare

Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) TY8G1S-PA66W-BK 151-11810

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Plastic Rivets TY8P1.

Compare

TY8P2-SET-PA66-BK 241-11820

Compare

Add to watchlist

Plastic Rivets TY8P1.

Compare

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) TY8P2-SET-PA66-BK 241-11820

Cable clip, Dmin=19.3mm, Dmax=36.1mm, ⌀M8

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCCSMM8-PA66HIRHSUV-BK 151-03556

Compare

Add to watchlist

Compare

Cable clip, Dmin=19.3mm, Dmax=36.1mm, ⌀M8

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCCSMM8-PA66HIRHSUV-BK 151-03556

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Fixing tie for edge, outside serrated

Compare

T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Compare

Add to watchlist

Fixing tie for edge, outside serrated

Compare

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Compare

Add to watchlist

Compare

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

2-piece fixing tie with edge clip 1-3mm, side fixing.

Compare

T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010

Compare

Add to watchlist

2-piece fixing tie with edge clip 1-3mm, side fixing.

Compare

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 500pcs.

Cable Tie Mounts MB and TY.

Compare

MB4A-PA66-WH 151-28418

Compare

Add to watchlist

Cable Tie Mounts MB and TY.

Compare

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 500pcs.

Compare

Add to watchlist

500 pcs.

White (WH) MB4A-PA66-WH 151-28418

Cable clip for hole (round), ⌀4.8 mm

C3-N66-BK.

Compare

C1-PA6HIR-BK 201-10010

Compare

Add to watchlist

C3-N66-BK.

Compare

Cable clip for hole (round), ⌀4.8 mm

Compare

Add to watchlist

100 pcs.

Black (BK) C1-PA6HIR-BK 201-10010

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)

Ratchet P-Clamp inserts for additional level of protection.

Compare

RCINSERTC-TPE-BK 151-01532

Compare

Add to watchlist

Ratchet P-Clamp inserts for additional level of protection.

Compare

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)

Compare

Add to watchlist

100 pcs.

Black (BK) RCINSERTC-TPE-BK 151-01532

Cable clip for screw fixation, ⌀5.3 mm, Dmin=8.0mm, Dmax=10.5mm

Compare

KB3-PA66-BK 231-10300

Compare

Add to watchlist

Compare

Cable clip for screw fixation, ⌀5.3 mm, Dmin=8.0mm, Dmax=10.5mm

Compare

Add to watchlist

100 pcs.

Black (BK) KB3-PA66-BK 231-10300

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, black, 100pcs.

4-way cable tie entry for more bundling options.

Compare

MB4A3-PA66-BK 151-28430

Compare

Add to watchlist

4-way cable tie entry for more bundling options.

Compare

Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) MB4A3-PA66-BK 151-28430

Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.

The holding tab increasese the tensile strength additionaly.

Compare

T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299

Compare

Add to watchlist

The holding tab increasese the tensile strength additionaly.

Compare

Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

2-piece fixing tie with EdgeClip for side cable routing.

Compare

T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Compare

Add to watchlist

2-piece fixing tie with EdgeClip for side cable routing.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm

Automatic Harness Clip Family for oval holes.

Compare

AHC4AH-PA66HIRHS-BK 151-00374

Compare

Add to watchlist

Automatic Harness Clip Family for oval holes.

Compare

Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm

Compare

Add to watchlist

400 pcs.

Black (BK) AHC4AH-PA66HIRHS-BK 151-00374

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU24C-AL/CR-BK 211-15240

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591

Compare

Add to watchlist

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591

Cable clip for hole (round)/for stud, ⌀M8, Dmin=10.0mm, Dmax=12.0mm, ⌀M8

The HVCC bracket range is designed to hold multiple cables in line, they can be used to secure cables to the body panel or chassis using an M6 bolt or stud.

Compare

DHVC10-12M8-PA66GF30/TPV-BK 151-04287

Compare

Add to watchlist

The HVCC bracket range is designed to hold multiple cables in line, they can be used to secure cables to the body panel or chassis using an M6 bolt or stud.

Compare

Cable clip for hole (round)/for stud, ⌀M8, Dmin=10.0mm, Dmax=12.0mm, ⌀M8

Compare

Add to watchlist

20

Black (BK) DHVC10-12M8-PA66GF30/TPV-BK 151-04287

Cable clip for hole (round)/for stud, ⌀M8, Dmin=15.0mm, Dmax=17.0mm, ⌀M8

Compare

DHVC15-17M8-PA6GF30/TPV-BK 151-04289

Compare

Add to watchlist

Compare

Cable clip for hole (round)/for stud, ⌀M8, Dmin=15.0mm, Dmax=17.0mm, ⌀M8

Compare

Add to watchlist

20

Black (BK) DHVC15-17M8-PA6GF30/TPV-BK 151-04289

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU20C-AL/CR-BK 211-15200

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for edge, EWCAP-005-11, black, 1000pcs.

Connector clip attaches to surfaces with edge clip.

Compare

CCEC6-PA66HIRHS-BK 150-92600

Compare

Add to watchlist

Connector clip attaches to surfaces with edge clip.

Compare

Connector clip for edge, EWCAP-005-11, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) CCEC6-PA66HIRHS-BK 150-92600

Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, natural, 100pcs.

TY8G1 TY8G1S Natural Fixing Cable Tie Screw Mount

Compare

TY8G1S-PA66-NA 151-11819

Compare

Add to watchlist

TY8G1 TY8G1S Natural Fixing Cable Tie Screw Mount

Compare

Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) TY8G1S-PA66-NA 151-11819

Plastic rivet fastener, ⌀4.0 mm, natural 1000pcs.

Plastic Rivets TY8P1.

Compare

TY8P1-PA66-NA 241-11819

Compare

Add to watchlist

Plastic Rivets TY8P1.

Compare

Plastic rivet fastener, ⌀4.0 mm, natural 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) TY8P1-PA66-NA 241-11819

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD180SM8SS-PA666V0/SS304-BK 151-02734

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

2-piece fixing tie with EdgeClip for top cable routing.

Compare

T50ROSEC4B-PA66W-BK 156-01154

Compare

Add to watchlist

2-piece fixing tie with EdgeClip for top cable routing.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC4B-PA66W-BK 156-01154

Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.

2-piece fixing tie for edges 1-3 mm, side fixation.

Compare

T50SOSEC5B-PA66HS/PA66HIRHS-BK 150-40583

Compare

Add to watchlist

2-piece fixing tie for edges 1-3 mm, side fixation.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSEC5B-PA66HS/PA66HIRHS-BK 150-40583

P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD180LM8SS-PA666V0/SS304-BK 151-02735

Compare

Add to watchlist

Compare

P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.

Compare

Add to watchlist

140 pcs.

Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip.

Compare

T50ROSEC4A-PA66W-BK 156-00570

Compare

Add to watchlist

Cable tie with edge clip.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC4A-PA66W-BK 156-00570

Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.

TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount

Compare

TY3G1S-PA66-NA 151-11319

Compare

Add to watchlist

TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount

Compare

Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) TY3G1S-PA66-NA 151-11319

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)

Ratchet P-Clamp inserts for additional level of protection.

Compare

RCINSERTB-TPE-BK 151-01531

Compare

Add to watchlist

Ratchet P-Clamp inserts for additional level of protection.

Compare

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)

Compare

Add to watchlist

100 pcs.

Black (BK) RCINSERTB-TPE-BK 151-01531

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)

Ratchet P-Clamp inserts for additional level of protection.

Compare

RCINSERTD-TPE-BK 151-01533

Compare

Add to watchlist

Ratchet P-Clamp inserts for additional level of protection.

Compare

Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)

Compare

Add to watchlist

100 pcs.

Black (BK) RCINSERTD-TPE-BK 151-01533

Connector clip for edge/for connector, black, 60pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed to securely hold an MC4 or MC4 EVO2 with an outer diameter of 21.5 mm and a maximum length of 122.0 mm.

Compare

SPC-DEC1-3SP-PA66HSUV/C75S-BK 151-04425

Compare

Add to watchlist

Designed to securely hold an MC4 or MC4 EVO2 with an outer diameter of 21.5 mm and a maximum length of 122.0 mm.

Compare

Connector clip for edge/for connector, black, 60pcs.

Compare

Add to watchlist

60 pcs.

Black (BK) SPC-DEC1-3SP-PA66HSUV/C75S-BK 151-04425

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

T50SOSEC5A-PA66HS/PA66HIRHS-BK 150-40593

Compare

Add to watchlist

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSEC5A-PA66HS/PA66HIRHS-BK 150-40593

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079

Compare

Add to watchlist

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip.

Compare

T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099

Compare

Add to watchlist

Cable tie with edge clip.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099

Fixing tie with pipe/tube holder, outside serrated, ⌀35.0mm, black, 500pcs.

T50SOS-AS cable tie, with pipe clip, rotatable.

Compare

T50SOSASVC4-PA66HIRHS-BK 156-03034

Compare

Add to watchlist

T50SOS-AS cable tie, with pipe clip, rotatable.

Compare

Fixing tie with pipe/tube holder, outside serrated, ⌀35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSASVC4-PA66HIRHS-BK 156-03034

Fixing tie with pipe/tube holder, outside serrated, black, 250pcs.

T50SOSASVCOC, rotatable, from 19 mm diameter

Compare

T50SOSASVCOC31-39-PA66HIRHS-BK 156-03044

Compare

Add to watchlist

T50SOSASVCOC, rotatable, from 19 mm diameter

Compare

Fixing tie with pipe/tube holder, outside serrated, black, 250pcs.

Compare

Add to watchlist

250 pcs.

Black (BK) T50SOSASVCOC31-39-PA66HIRHS-BK 156-03044

Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Distributors Contact

‹ › ×